Item Category Generic items: Air fittings ASAs and drops Barrels Camera parts Detents Feednecks Marker parts: Autococker Automag DLX Luxe Eclipse Empire Mini classic Empire MiniGS Empire Axe classic Empire Axe Pro FEP Quest Impulse BLAST / Field One Shocker Sport Shocker SFT / NXT Shocker RSX / XLS Shocker CVO Tippmann X7 Tippmann Crossover TM7 / TM15 Vanquish
Information Tech support Dealers Warranty Contact About Nummech Links Reviews Development lab Legal Promo images
Nautococker 45 Slider Grip Frame Item details: Nummech's "N-Autococker" grip frames are built using a new approach to the typical Autococker layout; the new frame combines the ergonomics of a 72-degree grip with an integrated frame-routed air supply. The frame houses a hidden regulator within the palm area, which internally delivers air to the marker's vertical adapter area, thus feeding the marker body.
The integrated regulator comes preset to approximately 350-psi, but it can be adjusted and rebuilt anytime using common tools. The regulator internals are accessed by removing the shutoff ASA adapter for maintenance or cleaning. To assist with the tuning process, an output pressure gauge can be installed to monitor the regulator's output pressure, which proves invaluable for pressure testing and/or sweetspotting.
Due to the internal air porting, the vertical ASA has been eliminated and replaced with a "dummy" foregrip. Multiple styles of foregrips are available, depending on your ergonomic preference; base foregrips range from versions with milled finger grooves, version that mimick classic regulators of the past, or even a lightweight carbon fiber tube grip. Foregrip accessories are also available; including an angled wedge, foregrip extender bracket, or a blocker cap that can be used with pump markers. All foregrips and accessories can be mixed-and-matched depending on preferences. These parts were designed with simplicity in mind and are key to keeping cost down and allowing anyone to experiment with different setups.
Nummech's "Telos" roller trigger/sear are included as standard components. The slide trigger is retained using dual brass-tipped ridge adjustment set screws and comes with an aluminum machined trigger shoe.
Compatability:
"2k style" Nautococker frames are compatible with Full-length or mid-block Autococker bodies only. The frame cannot be used on bodies that do not have a vertical adapter, including mini-length bodies and Empire Sniper/Resurrection. The frame must be used with a marker body that is 0.75 inches wide (19-mm) on its bottom surface.
- Features:
- Drop-in upgrade that requires no permanent marker modifications
- 72 degree frame with palm hump
- Compatible with standard ".45 style" grip panels and wraps
- Integrated pressure regulator contained within the grip (adjustable)
- Internally ported to eliminate external regulator hose
- Mechanical safety button (included)
- Compatible with 2k full-length Autococker bodies
- (Slider) double brass-tipped trigger ridge adjustment screws
- Integrated 1/8"-NPT test gauge port for regulator tuning and sweet-spotting
- Integrated pressure relief valve
- Completely rebuildable and easy to service
- Gas-through tank shutoff ASA adapter with knurled knob
- (Slider) Telos roller trigger and roller sear (included)
- (Slider) Aluminum trigger shoe (included)
- Multiple foregrips and accessories available
- Machined from solid billet aluminum 6061-T651 and plated with type-2 anodizing.
- Lifetime limited warranty included
- Included in the package:
- N-autococker slider grip frame with internal regulator and shutoff ASA
- (Slider) Telos roller trigger and sear
- Safety button with spring-ball hardware
- New mounting hardware and grip panel screws
- Choose your foregrip(s) upon ordering
- Printed installation instructions
- Foregrips and accessories:
- Milled 3-finger: Machined grip with three shallow finger grooves. If you are unsure which foregrip to use, we suggest this version as a default.
- Milled 4-finger: Machined grip with four shallow finger grooves. This is the largest foregrip we currently make.
- Milled 2-finger: Machined stubby grip with only two finger grooves. This is intended for use with pump markers.
- Blocker plate: Small cover plate for use with pump markers.
- Round BM grip: Round foregrip with an ergonomic shape mimicking that of the popular Black Magic regulators.
- Carbon fiber grip: Hollow carbon fiber tube with an aluminum cap and mount.
Currently we have the following foregrips available for purchase:
Nautococker grip frame - 45 SLIDER, 2K STYLE
-Typical color/finish options: BLACK GLOSS
-The item is in stock if you are able to add-to-cart below. If not then the item is backordered.
-Most aluminum products are available as either gloss or dust finish. "Gloss" components are smooth and somewhat reflective. "Dust" components have a matte or diffused finish which is non-reflective. "Polished" components have been buffed to a high sheen/luster (uncommon for our standard products due to the cost involved).
-Raw items are usually available for custom marker builds; contact us for information.
Status: Out of stock
Nautococker grip frame - INDIVIDUAL FOREGRIPS
-Typical color/finish options: BLACK GLOSS
-The item is in stock if you are able to add-to-cart below. If not then the item is backordered.
-"Gloss" components are smooth and somewhat reflective but not polished. "Dust" components have a matte surface finish and are non-reflective.
-Raw items are usually available for custom marker builds; contact us for information.